RFID Tags / RFID Inlay
The RFID card inlay is two or three PVC/PET layers laminated with embedded chip and antenna, also called chip material or pre lam (pre-laminating), it is a semi-finished product and core component of RFID card. Produced in the early stage of card production, RFID card inlay allows card factories to economically produce printed and personalized card easily and shorten production time
Different sizes, materials, chips are available, and you can personalize it.
24-hour one-on-one service, Fast delivery, and Good packaging.
Feature:
1, ultrasonic embedding copper antenna, reasonable COB design, guarantee high consistency, reliable performance.
2, reliable spot welding guarantee very solid welding point, the pull force exceeds 80g, minimize the card mal-function rate
3, brand new high quality PVC/PET material ensures the sturdiness, and easy to process,
4, chip shelter processing and high temperature steel sheet laminating technique guarantee the flatness of the whole inlay, no bumps on the inlay.
5, Trimmed reference edges and optional printed cross marks to make the further process easier.
6, semi-finished core material of RFID cards, it helps lower down the production cost of printed and personalized RFID cards.
7, it has complete most of the early stage work of a RFID cards, it shorten the production cycle dramatically
Specification:
Material | Packing: PVC, PET, PET-G, PC | |
Antenna: copper coil, aluminum | ||
Thickness | HF: 0.5mm/0.45mm/0.42(popular worldwide)/ 0.35mm/0.32mm | |
LF: 0.6mm/0.55mm/0.5mm | ||
Layout & size | 5*5 | 305*460mm(popular inside China) |
3*8 | 295*480mm(popular inside China) | |
4*8 | 391*520mm | |
5*8 | 495*518mm | |
4*10 | ||
extra-large size 56(7*8) layout is available, another layout can be customized. | ||
Interface | Contactless | |
Frequency | 125KHz, 13.56MHz, 915MHz | |
Chip | HF: Mifare S50, S70 / Ultralight/ Ntag213/Desfire(4k, 8k) / iCode slix / legic, FM11RF08 / C50 / ISSI4439 | |
LF: EM4100 / EM4305/ EM4450 / ATA5577 / TK4100 | ||
UHF: Alien series and Impinj series | ||
Antenna Technique: | HF: Aluminum etching, pre-winding copper coil, ultrasonic wire implanting / ultrasonic welding | |
LF: Pre-winding copper coil | ||
UHF: Aluminum etching | ||
Antenna Size: | 40*60mm, 47*78mm | |
Technique | Direct pressure technique | |
Double-sided sheltering (ensures the flatness of the chip position, no bumps) | ||
Pack | 50pcs/bag | |
Storage temperature | -25°C ~ +65°C | |
Application:
Standard contactless card inlay is mainly used to produce standard contactless cards, including RFID PVC Card, RFID PET Card, low frequency card, high frequency card, UHF card etc.
Prev:Inlay Sheet for Combi Card
Next:None
UHF 6C RFID Inlay-UHF6CRI-001 is one type of RFID Inlay, it's Consists of the chip, the sensor antenna,it's Packaged in a standard PVC, ABS, PET material card, No exposed parts of the card.the UHF 6C
Smart card inlay is layers of PVC/PET laminated with CPU chip and printed with antenna. It is a great solution to produce Java card. Smart card inlay is the critical and core component of a JAVA card.
Inlay sheet for combi card means the prelam (pre-laminating) specially designed for smart card contact and smart card contactless. It supports both contact and contactless communication, and controlle
The Card inlay is a very important component of RFID smart cards, which directly affects the performance of the card. Therefore, you are better to choose a reliable supplier.